How To Repair A Storm Door Latch
The constant employ and harsh slamming a storm door endures can lead to a storm door latch that stops working properly, making it difficult to open up and close the door. Fortunately, the latch can be repaired rather replaced most of the time. Here are the steps required to become the task washed properly.
Step 1 - Check the Door Hinges
If your tempest door hinges have come up loose, that could business relationship for your storm door latch not working properly. Loose hinges volition button the door out, resulting in a latch that doesn't match upward with the strike plate. Make sure that the screws that secure the hinges are tight. If they are loose, tighten them.
Step 2 - Audit the Strike Plate
The strike plate is where the door latches to stay shut. It is a metal plate that is attached to the door frame with a hole dug out of the eye for the latch to sit in. Sometimes the screws securing the strike plate tin go loose, causing the door to not latch properly. If this is the case, tightening the loose screws should make the door latch properly.
If the wood from the door frame sits higher in the strike plate opening than the bodily strike plate itself, this could besides cause the door not to close properly. Y'all can use a paw chisel to knock out the extra wood, only a much easier solution is to use a drill to grind downwardly the exposed wood. Once the backlog woods has been removed, the storm door should latch properly.
Step 3 - Movement the Strike Plate
If grinding down the exposed forest did non piece of work, you lot may accept to move the strike plate upwardly or down so the door will latch properly. Close the door slowly, paying attention to the latch. Does it await like it isn't centered in the strike plate? Is it sitting as well high or too low? If this is the example, and so remove the strike plate and reinstall so that it is lined upwardly with the latch. When y'all practice this, y'all will too need to re-chisel out the holes where the latch sits.
If the storm door yet won't latch properly, there is a chance that the latch is fine and the problem is with the door frame. Over time, the wood on a door frame tin warp, stopping the door from latching correctly. If this is the case, you may take to supercede the door frame.
Source: https://www.doityourself.com/stry/how-to-repair-a-storm-door-latch
Posted by: garzashoutheasken.blogspot.com
0 Response to "How To Repair A Storm Door Latch"
Post a Comment